Locks in general

Who said time is only counted in days or years. Seeems like its beeen two days since I last wrote on the blog but the date on my last post and now will prove against me. Well I got a new concept lets count time in periods instead. That should work in everyones favour. Hope you still trading fairly. Reminder to every locksmith is always do the best you can to make sure you provide the best way to secure anyone you provide services to and no short cut since their security lies in a bunch of keys

Hope 2011 is going well since we just finished the first of the month and everyone is back at work as usual.Hard work always pay out at last. The offer still stands if you have any questions about keys or locks or physical security here you will get answers so you can be better informed when problem solving Best wishes.

Best Wishes for the new year that just begun. May everyone get what they wish for and mostly peace in the world.

Seasons greetings to all. May the new year bring better humanity into everyone.

Well since the topic says Locks in general that means any industry involved with locks and keys will have to be discussed. One thing that gets to a technician or a key cutter is not getting the right key blank to either duplicate or worse cut a key from lock without a sample. Well I understand there are high security keys that have to have blanks taken stock of but I am talking of a normal standard mortise, tumbler or padlock. It makes me feel bad having to tell a customer to buy a new lock just because I can’t duplicate his key, in a few instances it does sound like you want to reap off the guy but you will be trying to help. So as for Lock manufacturers it is actually wiser to manufacture extra key blanks for locks before the Locks are put on the shop display or even better before delivering to the Locksmith Suppliers warehouse, because lets face it, keys do get lost or in many instances you need spare keys especially for main entrance doors.

Part 2 When fitting a lock make sure that none of the mounting screws are too long. If they, are it causes the mechanism of the lock to be stiff. It also causes the spring of the handle to jam and you end up with a handle that stays down when you open the door and limits the life span of the lock When you close a door you must be able to do it just by pushing the door without turning the handle, if not, then either the wind latch is facing the wrong direction or the bracket on the frame needs to be set at an angle that allow the wind latch to slide in smoothly If a lock is properly fitted then you won’t be able to open the door just by pushing without turning down the handle. If the door opens by pushing without turning the handle then the wind latch is facing the wrong side. Only fit reputable and strong locks or locks that you worked on before. Its not advisable to fit locks that customers provide because most people without knowledge of locks will buy a lock for its appear...

When testing if the lock you just fitted is working well always test lock with door in open position, this applies also to new locks When cutting a key from lock, always work your way from the tip of the blank going backwards this eliminates the problem of having the key you are working with getting stuck in the lock. When cutting a key from lock always leave the cuts slightly high then gently force the cylinder to turn in the barrel, take out key and check for marks on the blank or the pin then you fine tune the key Never file the pins or slides only the key blank is to be filled When fitting a lock makes sure that the latch and locking bolts are not visible from outside of the room. A gap between the door and the frame is the focal point of security. A big gap makes it easy to insert a craw bar and break the lock, this is the most common way intruders use to break through the lock bolts because the depth of locking latch is reduced